display Airstream+Project

	Fall/Winter 2013 November 2013 - Ginger`s trailer with new eyebrows (gutters) and window awnings. Airstream project.
	Fall/Winter 2013 November 2013 - Ginger`s trailer with new eyebrows (gutters) and window awnings. Airstream project.
	January 2011 - 1967 Airstream Globetrotter (20 feet) before TLC.
	January 2011 - 1967 Airstream Globetrotter (20 feet) before TLC.
	January 2011 - Old water pump and water tank on rotten floor.
	January 2011 - Old water heater and bathroom vanity section.
	January 2011 - Bathroom partition.
	January 2011 - Toilet and tub/shower.
	January 2011 - Wide angle of rusty frame.
	January 2011 - Panorama of rusty frame..
	January 2011 - Rusted step.
	January 2011 - Rusted frame with old step cut out.
	January 2011 - Frame painted with POR-15. New wheel tubs ready forinstallation.
	January 2011 - Paul welding repair rusted frame section.
	January 2011 - New step installed in repaired section.
	January 2011 - Rusted support for black water tank.
	February 2011 - Belly pan pieces with new sheet to replace one of them.
	February 2011 - Black water tank and rusted sheet metal box.
	March 2011 - Tabs welded to frame for bolting to shell.
	March 2011 - Tabs welded to frame for bolting to threshold (shell).
	March 2011 - Ginger starting to put in the new floor.
	March 2011 - New floor with elevator bolts.
	March 2011 - Epoxyed new flange to black-water tank.
	March 2011 - Repaired black-water tank.
	April 2011 - Remainder of the plywood floor going in.
	May 2011 - Bathroom corner linoleum in with abs ready to be reassembled.
	May 2011 - Bathroom corner linoleum in with abs ready to be reassembled.
	June 2011 - Ginger drilling out rivets in old smaller window.
	June 2011 - Old window ready to be removed.
	June 2011 - Old window out, hole cut larger for wider window.
	June 2011 - New window held in place temporarily with clecos.
	July 2011 - Polishing the shell. Masking to avoid greasy black stuff.
	July 2011 - Ginger polishing the shell.
	July 2011 - Polishing the shell. Not a mirror yet, but a lot shinier
	July 2011 - DC electrical panel and batterys.
	July 2011 - Water pump & tank with level sensors
	July 2011 - Hot & cold water manifolds and P V C braided flex tubing.
	July 2011 - Hot water heat and Ts for supply to sink.
	October 2011 - Bathroom pieces in place.
	October 2011 - Bathroom pieces in place.
	October 2011 - Bathroom partitions up - original panels on bath side.
	October 2011 - Gap for missing pocket door between panels.
	October 2011 - Pleated (accordion) vinyl door in lieu of pocket door.
	October 2011 - Cupboard rebuilt & cut down by 2 inches.
	October 2011 - Cupboard installed with doors from Ebay, also cut down.
	November 2011 - Black iron pipes for propane.
	November 2011 - Propane bottles on newly welded in stand.
	November 2011 - Driver side cupboard reinstalled.
	November 2011 - Front cupboard resized for door with plex mirrors.
	November 2011 - Steel frame for dinette.
	December 2011 - Frame with wood on legs & 1/4 ply backing.
	December 2011 - Seat base with plastic panel glued to ply.
	January 2012 - Seats and backs upholstered and installed.
	January 2012 - 12 volt DC wiring behind panel & under seat.
	January 2012 - 12 volt panel for DC circuits, tank level indicators, & photovoltaic control.
	January 2012 - Starting to look better, w running lights on the polished portion.
	January 2012 - Martha polishing.
	January 2012 - Martha polishing - its like a mirror.
	January 2012 - Sketchup plan of driver side interior and dinette..
	January 2012 - Sketchup plan of kitchen..
	January 2012 - Uprights for folding countertop.
	January 2012 - Routing slot for countertop trim.
	January 2012 - Richard at new boomerang formica table.
	January 2012 - Second bed deployed.
	February 2012 - Shelf up with cushions for 2 beds.
	February 2012 - Building raised platform for frig.
	February 2012 - Frig in place, w support on wall for large sink.
	February 2012 - Frame for sink cabinet with plastic on faces
	February 2012 - Storage cabinet frame with steel face & wood sides.
	March 2012 - Microwave shelf and plastic facings.
	March 2012 - Second battery switch, for inverter & tow vehicle power,.
	March 2012 - Storage Cabinet with doors, TV & electronics shelf.
	March 2012 - Sink Cabinet with doors.
	April 2012 - Curtains with trim matching formica.
	April 2012 - Martha with TV cover she made.
	June 2012 - New stronger axle finally installed.
	July 2012 - Awning installed.